21 CFR 175.300 (US FDA)
Approved for use in polymeric and resinous coatings.The colorant must be used in accordance with 21CFR 178.3297.
top
21CFR 178.3297-5% (US FDA)
Approved for use as a colorant in all polymers intended to contact food, at a level not to exceed 5% by weight.
Listed under 21CFR 178.3297
top
AP(89)1 (Europe)
Council of Europe AP(89)1 Approved Pigments - migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury, and selenium from the following pigments are typically below the limits set forth in the Council of Europe?s resolution AP(89)1 on the use of colourants in plastic materials coming into contact with food, 13 September 1989.
top
AS2070-1999 (Australia)
Australian Standard AS 2070-1999 Approved Pigments - migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury, and selenium from the following pigments are typically below the limits set forth in the Australian Standard AS 2070-1999, Plastics materials for food contact use (4.1.2 Colourants), published 5 March, 1999.
top
BfR (Germany)
List of the BfR Approved Pigments: Pigments are not regulated by the Bundesinstitut für Risikobewertung (BfR) unless they contain dangerous substances. The following Shepherd pigments are free of dangerous sunstances and therefore do not require BfR registration.
top
CONEG (United States)
The following pigments typically contain a sum total of the regulated metals lead, cadmium, mercury, and hexavalent chromium below the strictest specification of 100 ppm set forth in the Model Toxics in Packaging (CONEG) legislation.
top
EN71.3: 2013 Category I ()
Pigment will meet the purity requirements set forth in the EN71.3: 2013 standard for Category I (dry, brittle, powder-like or pliable material) as long as it is used under the maximum allowed % weight. Please see EN71.3: 2013 document for maximum allowed usage.
top
EN71.3: 2013 Category III ()
Pigment will meet the purity requirements set forth in the EN71.3: 2013 standard for Category III (scraped off material) as long as it is used under the maximum allowed % weight. Please see EN71.3: 2013 document for maximum allowed usage.
top
EU Packaging - 94/62/EC (EU)
The following pigments typically contain a sum total of the regulated metals lead, cadmium, mercury, and hexavalent chromium below the strictest specification of 100 ppm set forth in the Council of Europe Directive 94/62/EC, on packaging and packaging waste.
top
FPL Blue 28 (France)
Listed on the French Positive List - Circulaire No 176 Du 2 Decembre 1959, numeros 114: cobalt aluminate blue spinel.
top
GB9685 : 2016 (China)
Pigments typically meet the purity requirements set forth in the National Food Safety of the People?s Republic of China, GB9685-2016 Standard for Uses of Additives in Food Contact Materials and Articles. Please see GB9685:2016 document for limitations.
top
RoHS/ELV/WEEE (EU)
List of the ELV, RoHS and WEE Approved Pigments: The following pigments meet the purity thresholds for lead, cadmium, mercury and hexavalent chromium as specified in European Directives for the End of Life Vehicles (ELV), Restrictions on the use of hazardous substances in electrical and electronic equipment (RoHS) and Waste electronic and Electrical Equipment (WEEE) as they are currently written.
top
TCLP (USA)
List of TCLP Approved Pigments: The following pigments typically do not exhibit extractable contaminants in excess of those listed in 40CFR 261.24, using the Toxic Characteristic Leaching Procedure, Method 1311, 40CFR 261 appendix II. These products are thus not considered toxic for disposal purposes.
top
